Sold out
Sold out
Wooj Design

Cordless Kinoko Lamp | Pleated Mushroom 3D-Printed Rechargeable Table Lamp

$140.00
Color
Olive Oil

Out of stock
Click here to be notified by email when Cordless Kinoko Lamp | Pleated Mushroom 3D-Printed Rechargeable Table Lamp - Olive Oil becomes available.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Issey Miyake-Inspired Pleats Meet Cordless Freedom — The Kinoko Lamp Goes Anywhere

The Cordless Kinoko Lamp draws inspiration from the beautiful and functional qualities of pleated paper — a homage to the iconic work of designer Issey Miyake. 3D printed from recycled PLA in an accordion pattern, the Kinoko’s mushroom silhouette is familiar yet considered: it captures the soft light diffusion of a pleated paper shade without any of the fragility, in a form that is both sculptural and deeply practical.

Fully cordless and USB-C rechargeable, the Kinoko is built for life beyond the outlet. A weatherproof seal makes it suitable for outdoor and patio use, and you can use it while it’s charging — so it doubles as a plug-in lamp when you need it. Three dim-to-warm brightness settings let you set the perfect mood, and up to 80 hours of battery life on low means it’s rarely out of power. Made from recycled PLA and a recycled aluminum base, it’s a lamp that earns its place on any surface.

  • Accordion-pleated mushroom silhouette — inspired by Issey Miyake’s pleated paper designs
  • Soft, even light diffusion without the fragility of paper shades
  • Fully cordless — USB-C rechargeable with up to 80 hours of battery life
  • Usable while charging — works as a plug-in lamp when needed
  • Weatherproof seal — suitable for outdoor and patio use
  • Three dim-to-warm brightness settings (press the yellow button to cycle)
  • Recycled PLA shade and recycled aluminum base — sustainably made
Product Specifications
  • Dimensions: 7.5" H x 6.5" D
  • Materials: Recycled PLA shade; recycled aluminum base
  • Bulb (included): Custom LED unit, 2300K–2700K dimmable (non-replaceable; lamp is rechargeable)
  • Lumens: ~150 lumens (highest setting)
  • Battery Life: ~15H (max brightness) / ~28H (medium) / ~80H (low)
  • Weight: 1.5 lbs
  • Included in box: Cordless unit, lamp shade
  • Charging: USB-C (cable not included); usable while charging
Care Instructions
  • Wipe shade and base with a soft, dry or slightly damp cloth
  • Weatherproof seal protects against light moisture — do not submerge
  • Avoid abrasive cleaners or solvents that may damage the PLA or aluminum surfaces
  • Charge using any standard USB-C cable; do not use damaged cables
  • The built-in LED is not replaceable — the lamp is rechargeable by design
  • Keep away from prolonged direct sunlight to prevent PLA discoloration
  • Handle with care — PLA can warp under extreme heat